Clamp reinforced shot gun equal-loudness

Clamp shot gun equal-loudness, manufactured in galvanized steel Z-275. Thickness 2 mm.


Manufactured in steel galvanized Z-275.
Covered with profile of EPDM rubber that reduces the transmission of vibrations and noises that occur in plants.
Available diameter 40 mm. to 300 mm.
Load index: 175 Kg/ud without warping.
Coating thickness 20 microns.
Material thickness 2.0 mm. (diameters from 40 mm. (-200 mm)
And 2.5 mm thick. (diameter 250 mm. (-300 mm.)
Bolt riveting for Assembly with M8 threaded rod or double screw thread.
Equipped with 2 screws M6 DIN 933 and 2 M6 DIN 934 nuts.
Packing: bags of 2 units / box of 100 PCs. (diameter 40 mm. (-200 mm) and 50 PC. (diameter 250 mm. and 300 mm.)


They are used to fix and secure metal and PVC pipes.
Recommended for both new construction and rehabilitation.

Fast installation.
Comfort of use.
Strength and security
The clamps are normally installed every 2-3 meters away, always depending on the calculation of the load that must withstand the installation and the resistance of the clamp model used.